INT VROC Prem FIO for DL360/380 Gen10 Plus

Popis

Parametry

Hlídací pes

Intel VROC for HPE ProLiant Servers
Intel VROC for HPE ProLiant Servers is an enterprise, hybrid RAID solution, specifically designed for NVMe SSDs connected directly to the CPU. Intel® VROC is made possible by the new CPU feature Intel® Volume Management Device, Intel® VMD, a new hardware architecture on Intel® Xeon® Scalable Processors. Intel® VMD enhances drive performance as drives are directly connect to the Intel CPU enabling the lowest latency. Intel® VROC capitalizes on Intel® VMD for a simple software RAID solution that requires no additional hardware.

Models
Intel Virtual RAID on CPU Premium E-RTU for HPE	R7J59AAE
Intel Virtual RAID on CPU Premium FIO Software for HPE	R7J57A
Intel Virtual RAID on CPU Standard E-RTU for HPE	SOE38AAE
Intel Virtual RAID on CPU Standard FIO Software for HPE NVMe SSDs	S0E37A

Notes: -SED and RAID are specific to Intel and drives cannot migrate to be managed by other vendor controllers. -IP and SSA do not support VROC.

Drives supported Up to 32 NVMe drives (depends on platform and CPU type)

Performance 16Gb/s NVMe (up to 32 drives maximum)

Standard Features

Key Benefits

Key Features

- Up to 32 NVMe lanes (depends on platform and CPU type)

Description	Intel Virtual RAID on CPU Premium E-RTU for HPE	Intel Virtual RAID on CPU Standard E-RTU for HPE
SKU	R7J59AAE R7J57A	SOE38AAE S0E37A
Host Tools
GUI	Windows only	Windows only
CLI	Windows, Linux MDADM CLI, VMware VMDRCLI	Windows, Linux MDADM CLI, VMware VMDRCLI
Storage Protocol
BIOS Support	HII Utility, OBSE	HII Utility, OBSE
Key Features
Maximum Physical Drives (up to)	Up to 32 NVMe	Up to 32 NVMe
Maximum Logical Drives (up to)	Up to 24 in a single volume	Up to 24 in a single volume
RAID	0, 1, 5, 10 Windows and Linux	0, 1, 10 Windows and Linux
RAID	1, VMware is RAID 1 only and VMWare is only NVMe support	1, VMware is RAID 1 only and VMWare is only NVMe support
Boot Mode	UEFI Secure Boot	UEFI Secure Boot
Other features
HPE iLO features	NVMe Drive Fault and Locate LED Redfish Drive Resource NVMe Drive Events (IML, Alert, SNMP, AHS)	NVMe Drive Fault and Locate LED Redfish Drive Resource NVMe Drive Events (IML, Alert, SNMP, AHS)
Encryption	NVMe SED - Passive and Remote Key Management	NVMe SED - Passive and Remote Key Management
LED support	Activity, Locate, Fault, Predictive Failure	Activity, Locate, Fault, Predictive Failure
Bootable RAID	Build redundancy to protect your system volume	Build redundancy to protect your system volume
NVMe Hot insert and Surprise Removal	Expand volume, replace bad drive without system reboot	Expand volume, replace bad drive without system reboot

Server Compatibility

Please refer to the platform QuickSpecs to confirm compatibility for Intel VROC for HPE ProLiant Servers.

Operating Systems Microsoft Windows Server Microsoft Windows Hyper-V Server Linux VMware 7.0 U1 and U2

Notes: Customers will need to manually inject the driver when doing an O/S install from IP. Please see Intel VROC User Guide for Gen11* for more information. For more information on HPE's server operating systems and virtualization software, please visit: http://www.hpe.com/info/ossupport

Drivers Intel VROC is integrated with the HPE BIOS. The Intel VROC solution has two driver components: the pre-boot, or UEFI driver, and the OS driver. The UEFI driver is embedded in the system BIOS and is referred to as the RSTe NVMe UEFI driver, while the OS driver must be loaded at the OS installation time; both contain version numbers. Refer to the Intel VROC User Guide and Installation Instructions for more information. Notes: On a system with the Windows OS installed and an Intel VROC virtual drive present, the Windows RSTe OS driver version must not be prior to the RSTe NVMe UEFI driver version, otherwise unexpected behavior may occur. The RSTe OS driver can be downloaded from the HPE Support Center.

Technologie serverového řadiče: SAS+SATA+SATA SSD

RAID: 10

RAID: 1

RAID: 5

Počet kanálů řadiče: 2

Aktuální cena produktu je10552Kč s dph